1.1-Introduction 1.3-Start with micro:bit 1.4-Start with CALLIOPE 1.5-User extension 1.6-Translation 1.7-PreviousVersions 1.8-ReleaseLogs Hardware related tutorials 2.1-Boson for micro:bit 2.2-Maqueen Robot 2.3-Maqueen Plus Robot 2.4-Max:bot Robot 2.5-RoboMaster TT STEP1: Download Mind+ Programming Software STEP2: Install Driver STEP3: Switch to “Offline” mode STEP4: Select micro: bit STEP5: Edit a simple program STEP6: Upload to device Please prepare a Windows computer and components as below before we get started: STEP1: Download Mind+ Programming Software Open the webpage and download: http://mindplus.cc STEP2: Install Driver After downloaded and installed the software, open and click “Learning” to learn how to install driver(Follow the next step in the video). Click to open Learning ->Video Tutorials. Click to open Learning ->Video Tutorials. Click the related tutorial, and play the video. Click the related tutorial, and play the video. Install the SerialPort driver according to the instruction. And you just need to install the driver for once.

Install the SerialPort driver according to the instruction. And you just need to install the driver for once. STEP3: Switch to “Offline” mode Click “Code” icon at the right corner to switch mode(The old version has been changed to “code”). Switched to Offline mode successfully（Seeing the Upload is successfully）. STEP4: Select micro: bit Click “Project”-> “New Project” at the upper-left corner. Click “Project”-> “New Project” at the upper-left corner. Click “Extensions” at the lower-left corner Click “Board” Click “Micro: bit” Click “Extensions” at the lower-left corner Click “Micro: bit” STEP5: Edit a simple program Edit a program to display a pattern on micro: bit LED panel: Drag the blocks we do not need currently to “command area” to remove it. Drag the blocks we do not need currently to “command area” to remove it. Click “micro: bit” module Click “micro: bit” module Drag “display pattern” block onto “Script” area. Drag “display pattern” block onto “Script” area. Place “display pattern” block under the “micro: bit starts” block Place “display pattern” block under the “micro: bit starts” block STEP6: Upload to device Connect micro: bit board to your computer via USB, then the power indicator on the board will light up. Connect micro: bit board to your computer via USB, then the power indicator on the board will light up. Click “Connect Device” in the menu bar, then click “COM-micro: bit” in the drop-down menu to connect micro: bit board to the computer. Click “Connect Device” in the menu bar, then click “COM-micro: bit” in the drop-down menu to connect micro: bit board to the computer. When connected, edit your programs and click “Upload” to upload the programs to your board (if the connection fails, then it will prompt “No Device Connected”. There will be a prompt box to display the uploading progress. When the program is updated, the prompt box will disappear. When connected, edit your programs and click “Upload” to upload the programs to your board (if the connection fails, then it will prompt “No Device Connected”. There will be a prompt box to display the uploading progress. When the program is updated, the prompt box will disappear. micro: bit power indicator flashes only when uploading the program, and stops flashing and keeps ON after the upload is completed. Try uploading a program to your micro: bit board, and make the board display an “love heart” for you! Result,The screen shows a heart icon.